COVER GLASS VISUAL INSPECTION SYSTEM
Cover glass visual inspection equipment
overview
・ C / G is put into the equipment by Tray, and the upper and lower protective film is put on.
After peeling off and cleaning the upper and lower surfaces of C / G with USC, inspect the upper and lower surfaces
After that, a device that attaches a protective film to the back and discharges it
is.
feature
・ VACUUM GRIPPER when transporting CG and on the contact surface
Benefits of using.
(1) Has excellent adsorption power with minimal contact.
(2) Prevent suction marks and scratches by a non-contact method.
③ Transport is possible with abundant suction flow rate and low air consumption.
Possible.
④ Semi-permanent life is achieved because there is no drive unit.
specification
·camera:
Top composite optical group 50M Area Scan Camera
2 each for upper and lower
Bottom composite optical group 8K Line scan camera 2 pcs
・ Shooting resolution: 20㎛X 20㎛
-Detection defects: Ink splatters, jaggedness,
Foreign matter, pinholes, scratches, chipped outer circumference
・ Lighting: Multi Channel Ring Light (16ch)
Top 2 pcs, Back Light Top 2 pcs
・ Inspection method: Sheet type
* Please contact us for detailed structure and specifications.